Remote Fuel Tank Flap Switch E204 and Rear Lid Remote Control Lock Switch E233 , removing and installing

Fig 1: Locating Switch For Interior Monitoring And Towing Protection Or Trunk Release Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Location: drivers door trim in storage compartment - detail  -

Removing 

• Remove drivers door trim → 70 - INTERIOR TRIM .
• Disconnect electrical connections.

Fig 2: Identifying Catches, Interior Monitoring And Towing Protection, And Trunk Release Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Carefully release retaining hooks - arrows  -.
• Press switches as applicable - 1  - and - 2  - towards rear out of trim.

Installing 

Install in reverse order of removal, noting the following:

• Install drivers door trim → 70 - INTERIOR TRIM .