Glove Compartment Light W6 , removing and installing

Removing 

• Turn light switch to position "0".

Fig 1: Identifying Retaining Tab, Glove Box Light, And Electrical Connection

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Using a flat-head screwdriver, press in retaining tab - 1  - and pry out glove box light - 2  -.
• Disconnect electrical connection - 3  -.
• Remove bulb (12 V, 5 W) from bulb holder.

Installing 

Install in reverse order of removal, noting the following:

• Insert glove box light in opening and engage on opposite side.