High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344, removing and installing

Removing 

• Remove headlamp → Headlamps, removing and installing .

Fig 1: Identifying Screws And Control Module

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws - arrows  -.
• Remove control module - 1  - from housing cover for headlamp housing.

Fig 2: Identifying Electrical Connections

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect electrical connections - 1  - and - 2  -.

Installing 

Install in reverse order of removal, noting the following:

• Check gasket between control module for HID headlamp bulb and headlamp housing.
• Install headlamp Installing .
• Reconnect battery. Required steps Reconnecting .

Tightening torque