High Intensity Gas Discharge (HID) Lamp Control Module J343 / J344 - through approx. 09.01, removing and installing

Removing 

• Remove headlamp → Headlamps, removing and installing .

Fig 1: Releasing Retaining Clip And Detaching Housing Cover For Low Beam From Headlamp Housing

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release retaining clip - arrow  - and detach housing cover for low beam from headlamp housing.

Fig 2: Locating Connector And Retaining Clip

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove connector - 1  - at HID headlamp bulb by turning counter-clockwise.

Fig 3: Identifying Control Module Screws

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove screws - arrows  -.
• Remove control module from headlamp housing.
• Connector at HID headlamp bulb can then be passed through headlamp housing.

Installing 

Install in reverse order of removal, noting the following:

• Secure housing cover with retaining clip.
• Install headlamp Installing .