Headlamp washer spray jets, removing and installing

Removing 

• Remove front bumper cover → 63 BUMPER .

Fig 1: Pulling Up On Spray Jet Covers At Bumper And Carefully Disengaging Mounts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Pull cover of spray jet upwards away from bumper cover and carefully disengage retainers - arrow  -.

Fig 2: Identifying Washer Fluid Hose, And Spray Jet Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Release clamp and remove hose - 3  -.
• Remove screws - 1  - and - 2  - and detach spray jet.

Installing 

Install in reverse order of removal, noting the following:

• Install front bumper cover → 63 BUMPER .

Tightening torque