Easy-entry facility (manual), removing and installing: Notes
1 - Lever
2 - Pins (2x)
3 - Easy-entry facility (manual)
- Removing
- Move front seat forward as far as possible.
- Remove seat → Seat, assembly overview .
- Drill out rivet - 4 - at runner - 5 - and take out metal holders (2x) on inside of runner - 5 -.
- Press lever - 1 - until pins - 2 - (2x) are in runner - 5 - and pull runner - 5 - to rear in direction of - arrow -.
- Remove easy-entry facility - 3 -.
- Installing
- Guide easy-entry facility into runner Guiding easy-entry facility into runner
- Installing easy-entry facility - 3 - in reverse order of removal.
4 - Rivet
5 - Runner
6 - Handle for length adjustment