Seat backrest wiring harness, assembly overview

Fig 1: Seat Backrest Wiring Harness, Assembly Overview

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Connector (3x)

2 - Wiring harness

• Removing 

• Remove seat → Seat, assembly overview .
• Remove side trim, outboard side → Side trim on sill panel side, removing and installing .
• Remove side trim, inboard side → Side trim, inboard side, assembly overview .
• Remove backrest → Front seat backrest, assembly overview .

• Remove backrest cover panel → Backrest cover panel, removing and installing .
• Remove cover and padding from backrest → Backrest cover and padding (sports seat, standard seat), removing and installing .
• Detach cable ties - 3  - (3x).
• Disconnect connectors - 1  - (3x).

• Remove wiring harness - 2  -.

• Installing 

• Installation is in reverse order of removal.

3 - Cable ties (3x)