Removing instrument panel vent
- Disconnect connector for instrument panel vent light.
NOTE:
- The illustration shows instrument panel vent on passenger side.
- The center instrument panel vents must be pulled out to detach connector for light.
- Move rear air flaps of instrument panel vent into central position by turning adjustment wheel - 1 -.
Fig 2: Guiding Tool 3438 In Position Into Instrument Panel Vent & Hooking Tool 3438 By Slightly Moving It Into Recesses At Rear End Of Instrument Panel Vent
- Guide tool 3438 in position - 2 - or - 3 - into instrument panel vent.
- Hook tool 3438 by slightly moving it into recesses - 4 - at rear end of instrument panel vent.
Fig 3: Detaching Instrument Panel Vent Carefully To Rear Alternating Between Left/Right Using Special Tool 3438
- Detach instrument panel vent carefully to rear alternating between left and right using special tool 3438.