Hid Headlamps Assembly Overview, Through 05.2008

Fig 1: Identifying Headlamp With High Intensity Gas Discharge (HID) Lamps, Assembly 1

Courtesy of AUDI OF AMERICA, LLC

1. Adjusting Nut
   • For adjustment of headlamp to bumper contour
2. Gap Cover
3. Fastener
   • 6 Nm
4. Light Bulb for Parking Lamp
   • Only for rest of world vehicles
   • 12V, 5 W
   • Bulbs, replacing, refer to BULB FOR PARKING LAMP, REPLACING 
5. High Beam Bulb
   • H7 - 12V, 55 W
   • Bulbs, replacing, refer to HIGH BEAM BULB 
6. Lamp Socket
   • For light bulb for parking lamp
   • Only for rest of world vehicles
7. Housing Cover
   • For high beam/parking lamp
8. Fastener
   • 6 Nm
9. Fastener
   • 1 Nm
10. Headlamp Range Control Positioning Motor
    • For left headlamp, left headlamp range control positioning motor -V48-
    • For right headlamp, right headlamp range control positioning motor -V49-
    • Removing and installing, refer to HEADLAMP RANGE CONTROL POSITIONING MOTOR 
11. Mount
    • For headlamp beam adjusting motor
12. Fastener
    • 1 Nm
13. Housing Cover
    • For low beam
14. Ignition Coil
    • For gas discharge lamp
15. Retaining Ring
    • For gas discharge lamp
16. Gas-Discharge Lamp
    • 35 W, D2S
    • Bulbs, replacing, refer to GAS DISCHARGE BULB FOR LOW BEAM LAMP, REPLACING 
17. Lamp Socket
    • For turn signal lamp
18. Fastener
    • 6 Nm
19. Turn Signal Indicator Bulb
    • 12V, 21 W
    • Orange
    • Bulbs, replacing, refer to TURN SIGNAL BULB 
20. Headlamp Housing
21. Adjusting Nut
    • For adjustment of headlamp to bumper contour
22. Fastener
    • 1.5 Nm
23. HID Headlamp Control Module
    • For the left headlamp, left HID lamp control module -J343-
    • For the right headlamp, right HID lamp control module -J344-
    • Removing and installing, refer to HID HEADLAMP CONTROL MODULE