Turbocharger Vacuum Diaphragm

Removing 

-- Remove the turbocharger. Refer to TURBOCHARGER .

-- Remove securing plate -1- over linkage on turbocharger.

Fig 1: Removing Securing Plate Over Linkage On Turbocharger

Courtesy of AUDI OF AMERICA, LLC

-- Loosen lock nut -2-.

Fig 2: Identifying Lock Nut, Turbocharger, Vacuum Diaphragm

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect linkage from turbocharger -3-.

-- Remove vacuum diaphragm -1- from transmission -arrows-.

Installing 

Install in reverse order of removal. Note the following:

For the correct tightening specifications, refer to TURBOCHARGER OVERVIEW => Part IV .

-- Adjust the turbocharger vacuum diaphragm. Refer to TURBOCHARGER VACUUM DIAPHRAGM, ADJUSTING .

-- Install turbocharger. Refer to TURBOCHARGER .