Terminal assignments at multi-pin connectors

Fig 1: Multi-Pin Connector For Windshield Wiper Switch And Multi-Pin Connector For On-Board Computer

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Multi-pin connector for windshield wiper switch -A-

1 - Terminal 53

2 - Open

3 - Open

4 - Terminal 53c

5 - Open

6 - Terminal 53 b

7 - Intermittent wipe

8 - Terminal 53a

Fig 2: Multi-Pin Connector For Windshield Wiper Switch And Multi-Pin Connector For On-Board Computer

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Multi-pin connector for on-board computer -B-

1 - On-board computer rocker switch: right

2 - On-board computer rocker switch: left

3 - Terminal 31

4 - On-board computer: Reset

5 - Intermittent wipe relay

6 - Terminal 31

Fig 3: Multi-Pin Connector For Cruise Control System

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Multi-pin connector for cruise control system -C-

2 - Engine control module, pin 75 (resume / increase speed)

3 - Engine control module, pin 57 (set / reduce speed)

4 - Engine control module, pin 38 (on / off + erase; main switch off completely)

5 - Engine control module, pin 76 (temporarily off without erasing; main switch not engaged in "off" position)

6 - Terminal 15

7 - Engine control module, pin 38 (on / off + erase; main switch off completely)

Fig 4: Multi-Pin Connector For Turn Signal Switch

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Multi-pin connector for turn signal switch -D-

1 - Terminal 30 (battery +)

2 - Terminal 30 (battery +)

3 - Terminal L (left turn signals)

4 - Terminal P (parking lights)

5 - Terminal 49a (turn signals)

6 - Open

7 - Terminal 56 (headlights)

8 - Terminal 56b (low beam)

9 - Terminal PL (left parking lights)

10 - Terminal PR (right parking lights)

11 - Terminal R (right turn signals)

12 - Terminal 56a (high beam headlights)