Engine speed threshold, adaptation
This function permits influencing of the offset value for the engine speed threshold of the dynamic oil pressure warning function.
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -1- and -0- and confirm input with Q button.
| Rapid data transfer Q 10 - Adaptation |
Indicated on display:
- Press -Q- button to confirm input
| Adaptation Enter channel no. XX |
Indicated on display:
- Press buttons -3- and -5- to access "channel 35".
- Press -Q- button to confirm input
- Indicated on display: Display shows adaptation value, e.g. 0.
NOTE:
- Adaptation value 0 corresponds to a factory set oil pressure warning if oil pressure drops below 1.2 bar at an engine speed of 1500 rpm.
- Adaptation can be performed in four increments (0-1000).
- Adaptation value "250" changes engine speed threshold to 1750 rpm.
- If value "0" has been altered on account of a customer complaint modified value must be entered in new instrument cluster.
- Press → button.
- Indicated on display:
- Enter required adaptation value (e.g. 00250) via scan tool button pad, filling in the initial spaces with "0", e.g. 00250.
- Indicated on display (example only):
- Press -Q- button to confirm input
- Indicated on display:
- Press-Q- button to confirm input.
- Indicated on display:
- Press-Q- button to confirm input.
- Indicated on display:
- Press → button to terminate adaptation of engine speed threshold.