Upper right coolant pipe, removing and installing
WARNING: This page is about a different variant/trim than selected.
Removing
- Engine/transmission assembly removed and attached to scissor lift platform VAS 6131.
- Remove bolts - 1 - and - 2 - for upper right coolant pipe.
- Loosen hose clamps - arrows - and pivot coolant pipe upward and out.
Installing
Installation is in reverse order of removal. Note the following:
NOTE:
- Secure all hose connections using hose clamps appropriate for the model type .
- Install engine/transmission assembly → Engine, Installing .
Tightening torque
| Component | Nm |
|---|---|
| Upper right coolant pipe to cylinder head | 20 |