Actuator mechanism for manual release, removing and installing

WARNING: This page is about a different car, the 2010 Audi A8, 2009 Audi A8, 2008 Audi A8, 2007 Audi A8, and 2004 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Removing

Shift mechanism function unit removed.

Fig 1: Actuator Mechanism For Manual Release

GW00029338

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove bolts - 1 - and remove actuator mechanism.

Installing

To assemble actuator mechanism, Insert sliding bracket - 3 - with tabs - arrows A - into cut-outs - arrows B - of cover - 2 -.
Clip end of Bowden cable - 4 - into sliding bracket and bracket into cover.
Secure assembled actuator mechanism to shift mechanism function unit.

Flat part - arrow C - faces toward connecting wires.