Contact corrosion!
WARNING: This page is about a different car, the 2010 Audi A8, 2009 Audi A8, 2008 Audi A8, 2007 Audi A8, and 2004 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.
Contact corrosion can occur if non-approved fasteners are used on vehicle (bolts, nuts, washers, etc.).
For this reason, all fasteners used in production are specially treated.
In addition, rubber or plastic parts and adhesive are made of materials that do not conduct electricity.
If you are not sure about the suitability of parts, install new parts .
NOTE:
- We only recommend original replacement parts. They have been checked and are compatible with aluminum.
- We recommend using Audi accessories.
- Damage resulting from contact corrosion is not covered by the warranty.