Camshaft Guide Frame, Tightening Sequence

WARNING: This page is about a different car, the 2009 Audi S8, 2008 Audi S8, and 2007 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Guide Frame Bolts Tightening/Loosening Sequence

GW00022313

Courtesy of VOLKSWAGEN UNITED STATES, INC.

NOTE:

The Illustration Shows The Guide Frame For The Left Cylinder Head.

Tighten Bolts In 3 Stages In Sequence - 1 To 28 - :
Tighten Bolts By Hand.

The Guide Frame Must Be In Contact With The Entire Contact Surface Of The Cylinder Head.

Tighten Bolts To 8 Nm.
Tighten Bolts An Additional 90.