LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2005 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (5.2L - Engine Mechanical, Engine Code(S): BSM) >> 13 - Engine - Crankshaft, Cylinder Block >> Piston and Connecting Rod, Disassembling and Assembling >> Piston and Connecting Rod, Component Overview >> Oil spray jet for piston cooling

Oil spray jet for piston cooling

WARNING: This page is about a different car, the 2009 Audi S8, 2008 Audi S8, and 2007 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Oil Spray Jet For Piston Cooling
GW00018235Courtesy of VOLKSWAGEN UNITED STATES, INC.
  1. Oil spray jet
  2. Bolts - 9 Nm. Insert with locking compound; Locking compound .
CAUTION:
  • Do not bend piston spray nozzles.
  • Bend piston spray nozzles must be replaced.
scientia non olet · About LEMON Manuals