Center Backrest Section Release Handle, Removing and Installing

NOTE:

The release handle for backrest center section is depicted in the removed state for purposes of clarity.

Fig 1: Release Handle, Protrusions, Drillings, Springs & Mounts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing

Using a flat screwdriver, carefully press protrusions - 2 - out of drillings - 3 -.
Disengage springs - 4 - from mounts - 5 -.
Remove release handle - 1 -.

Installing

Fig 2: Release Handle, Protrusions, Drillings, Springs & Mounts

Courtesy of VOLKSWAGEN UNITED STATES, INC.