Rear Seat Heating Switch, Removing and Installing

Rear heated seat switches are only integrated into Rear A/C Control Head (Climatronic) E265. They cannot be replaced separately.

Removing 

Fig 1: Mounting Frame Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Switch off ignition and remove ignition key.
• Remove rear ashtray.
• Remove bolts - arrows  - and detach mounting frame with air vents.
• Disconnect connectors.

Fig 2: Detaching Trim From Mounting Frame & Unclipping Switches From Switch Mount

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Detach trim - 3  - from mounting frame - arrows  -.
• Unclip switches - 1  - and - 2  - from switch mount.

Installing 

Install in reverse order.

Tightening torque