Glove Compartment Lamp Switch, Removing and Installing

Removing 

Fig 1: Hinge Pin, Electrical Connector, Switch & Counterclockwise

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Switch off ignition and remove ignition key.
• Remove glove compartment → 68 - INTERIOR EQUIPMENT .
• Disconnect electrical connector - 2  -.
• Remove hinge pin - 1  -.

• Open removed glove box.
• Release switch - 3  - counterclockwise - arrow  - and remove.

Installing 

Install in reverse order of removal, observing the following:

• Install glove compartment → 68 - INTERIOR EQUIPMENT .