Service interval display, resetting after a service without using VAG 1551/1552

After a service has been carried out (Oil Change + Inspection Service), the service interval display must be reset accordingly.

The service interval display can be reset using the adaptation function on VAG 1551 scan tool. Refer to Adaptation (function 10)  .

The service interval display can also be reset using the following procedure:

• Switch off ignition.
• Press the trip recorder reset button on the instrument cluster and at the same time switch on the ignition.

When the trip recorder reset button is released, the display will show "SERVICE IN ???? km" or "SERVICE."

• Within a period of 5 seconds, turn the clock adjuster knob on the instrument cluster counter-clockwise until the message is reset to "SERVICE IN 15000 KM."

The trip recorder display will now read "SERVICE IN 15000 KM."

• Switch off ignition.