Application notes

The following OBD program information applies to instrument clusters on vehicles through m.y. 2000 only. OBD program information for instrument clusters from m.y. 2001. Refer to General Information  .

Always confirm vehicle VIN and instrument cluster software version as per section title above. Confirm instrument cluster software version by initiating OBD program and reading information in display. Refer to Instrument cluster On Board Diagnostic (OBD), initiating  .

In the event an instrument cluster was previously replaced in a vehicle with VIN up to 8N_Y040000, the new/replacement cluster may contain software version D26 which contains certain Diagnostic Trouble Code (DTC), Read Measuring Value Block and Adaptation information that is not specifically covered in this section.

Information on replacement instrument clusters with software version D26 are contained in section "Interment cluster On Board Diagnostic (OBD) from VIN 8N_Y040001 and/or software versions from D26 &D03". Refer to Application notes  .