Light Switch -E1-, removing and installing
CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
Removing
- Ensure light switch is in -O- position.
Fig 1: Pressing Light Switch While Turning To Right And Holding Switch In Position While Pulling Out Of Housing
- Press light switch -arrow 1- while turning to right -arrow 2-.
- Hold switch in this position and pull out of housing -arrow 3-.
- Disconnect electrical connections.
Installing
Install in reverse order of removal of removal, noting the following:
- Press switch into switch housing until catch engages.