Read Measuring Value Block (function 08): Notes
Use this function to observe various instrument cluster inputs and stored data.
The measuring value block is divided into 12 display groups, each containing 4 display fields.
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -0- and -8- to select "Read Measuring Value Block"function 08.
| Rapid data transfer Q 08 Read Measuring Value Block |
Indicated on display:
- Press -Q- button to confirm input
| Read Measuring Value Block HELP Enter display group number XXX |
Indicated on display:
- Enter desired Display Group number. Refer to table beginning from Read Measuring Value Block (function 08) .
- Press -Q- button to confirm input.
The Read Measuring Value Block selected appears in the standard format.
Interpreting displayed information. Refer to from Read Measuring Value Block (function 08) .
NOTE:
- The display on the scan tool will always show the actual values obtained from the senders and sensors. The values which appear on the instrument cluster are filtered and may not be the same.
- If the actual coolant temperature is between about 80 ° C and 100 ° C, the instrument cluster will always show 90 ° C.
- Data from display groups 10 to 15 must be recorded prior to instrument cluster replacement.
- Read Measuring Value Block 140 indicates all Control Modules that are active on part of the Information CAN-Bus network.
- The display groups shown here are the only ones which can be called up for the instrument cluster.