Powertrain CAN-Bus, adaptation
NOTE:
- The instrument cluster does not support Powertrain CAN-Bus functions. Therefore, "0" must be confirmed as the adaptation value.
- Input values when replacing instrument cluster. Refer to Replacement instrument cluster input values, adapting .
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press keys -1- and -0- and confirm input with Q button.
| Rapid data transfer Q 10 - Adaptation |
Indicated on display:
- Press -Q- button to confirm input.
| Adaptation Enter channel no. XX |
Indicated on display:
- Press keys -6- and -0- to access "channel 60".
- Press -Q- button to confirm input.
| Channel 60 Adaptation 0 → < -1 3- > |
Indicated on display:
- Press → button.
| Channel 60 Adaptation 0 Enter adaptation value XXXXX |
Indicated on display:
Entry via keypad: 00000
| Channel 60 Adaptation 0 Q Enter adaptation value 00000 |
Indicated on display:
- Press -Q- button to confirm input.
| Channel 60 Adaptation 0 Q < -1 3- > |
Indicated on display:
- Press -Q- button to confirm input.
| Channel 60 Adaptation 0 Q Store changed value? |
Indicated on display:
- Press -Q- button to confirm input.
| Channel 60 Adaptation 0 → Changed value is stored |
Indicated on display:
- Press → button to terminate adaptation for Powertrain CAN-Bus.