Oil grade, adaptation (where applicable)
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -1- and -0- and confirm input with Q button.
| Rapid data transfer Q 10 - Adaptation |
Indicated on display:
- Press-Q- button to confirm input.
| Adaptation Enter channel no. XX |
Indicated on display:
- Press buttons -4- and -5- to access "channel 45".
- Press-Q- button to confirm input.
NOTE:
- Oil used must be re-adapted after each service.
- The adaptation value can be set from 1-4. Attached to each value from 1-4 is a max distance (channel 43) and a maximum time (channel 44).
- The value entered for the corresponding engine variation must correspond to value of table. Refer to General information .
- Confirm maintenance intervals applicable to vehicle. Refer to Service Circulars, Maintenance.
| Channel 45 Adaptation 1 → Oil grade < -1 3- > |
Indicated on display:
- Press → button.
| Channel 2 Adaptation 1 Enter adaptation value XXXXX |
Indicated on display:
- Required value via scan tool button pad, filling in the initial spaces with "0".
Input value: e.g. 2
Entry via keypad: 00002
| Channel 45 Adaptation 1 Q Enter adaptation value 00002 |
Indicated on display (example only):
- Press-Q- button to confirm input.
| Channel 45 Adaptation 2 Q Oil quality < -1 3- > |
Indicated on display:
- Press-Q- button to confirm input.
| Channel 45 Adaptation 2 Q Store changed value? |
Indicated on display:
- Press-Q- button to confirm input.
| Channel 45 Adaptation 2 → Changed value is stored |
Indicated on display:
- Press → button to terminate adaptation of oil grade.