Read Measuring Value Blocks, interpreting


Read Measuring Value Block 1			→	← Indicated on display (example only):
50 km/h	2400 RPM	Oil p2<min	12:20 h
				Time
			Oil pressure switch 2 Oil p2< min ( = less than minimum) Oil p2OK ( = okay)
		Engine speed 0 - 9990 RPM
	Road speed 0 - 300 km/h


Read Measuring Value Block 2			→	← Indicated on display (example only):
2390 km	43 ltr.	219 Ohm	23.0 ° C
				Ambient temperature -40 - +70 ° C
			Fuel gauge sender front wheel drive = 54Ohm (empty) - 290 Ohm (full) all wheel drive = 59 Ohm (empty) - 282 Ohm (full)
		Fuel gauge 0 - 100 ltr.
	Odometer reading


Read Measuring Value Block 3		→	← Indicated on display (example only):
85.0 ° C



	Engine Coolant Temperature (ECT) 50 - 130 ° C


Read Measuring Value Block 50			→	← Indicated on display (example only):
2390 km	2400 RPM	99 ° C	85.0 ° C
				Engine Coolant Temperature (ECT) 50 - 130 ° C
			Oil temperature
		Engine speed 0 - 9990 RPM
	Odometer reading