Front Ashtray, Removing and Installing

Special tools, testers and auxiliary items required 

Fig 1: Torque Wrench V.A.G 1783

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Torque wrench V.A.G 1783/

Removing 

• Place selector lever in position "S".
• Switch off ignition.
• Open front ashtray.

Fig 2: Ashtray Insert & Button

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Operate button - arrow  -.
• Pull out ashtray insert - 1  -.

Fig 3: Front Ashtray & Bolt

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolt - 1  -.
• Pull front ashtray - 2  - out of center console.
• Disconnect electrical connector.

Installing 

Installation is reverse of removal.

Tightening torque:

Front ashtray to center console: 4 Nm