Tail Lamp, Aligning to Body Contour

Procedure 

Fig 1: Tail Lamp, Aligning To Body Contour Nuts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove rear lid trim → 70 - INTERIOR TRIM .

Adjustment perpendicular to driving direction: 

• Loosen the nuts - 2, 3 and 4  - and slide the tail lamp as needed.

Adjustment in driving direction: 

• Tighten/loosen the double bolt - 2  - after loosening nut - 1  -.
• Install luggage compartment lid trim → 70 - INTERIOR TRIM .
• After loosening the nuts - 2, 3 and 4  - , loosen or tighten the double bolt - 1  - at the hex head.

Tightening torque