Function Selector Switch 2 (Navigation), removing and installing

CAUTION:

Before beginning repairs on the electrical system:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Removing

Remove switch mount in rear center console. Refer to Switch mount in rear center console, removing and installing .

Fig 1: Function Selector Switch 2 (Navigation) Remove/Install Components

GW00017111

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Use small knife or feeler gauge to release retainer tabs -arrows-.
Pull switch -1- upwards out of switch mount -2-.

Installing

Install in reverse order of removal of removal, noting the following:

Press switch into switch mount until fasteners engage.