LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> TT Base, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Electrical Equipment >> 94 Lights, Switches - Exterior >> Rear lights >> Rear light housing and bulb holder, removing and installing >> Installing

Rear light housing and bulb holder, removing and installing: Installing

Install in reverse order of removal, noting the following:

NOTE:
  • Ensure tight seal between body and rear light housing.
  • Align rear light housing to body contours if necessary. Refer to Rear light housing, alignment  .

Tightening torque 

Component  Nm 
Knurled fastener to rear light 3.5
scientia non olet · About LEMON Manuals