Removing (all-wheel drive)

CAUTION:

Before beginning repairs on the electrical system:

Sensor (all-wheel drive) is mounted above the rear axle at the component carrier.

Fig 1: Left Rear Level Control System Sensor -G76- Remove/Install Components (All-Wheel Drive)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Disconnect electrical connection.
Remove nut -3- and detach linkage. Linkage is mounted to the crossmember with a bracket and two nuts.
Remove both socket head bolts -4- (3mm) at level sensor and remove it from bracket -1-.
If necessary, bracket -1- can be removed from component carrier by removing both bolts -2-.