Left Front Level Control System Sensor -G78-, removing and installing
Removing (front-wheel drive and all-wheel drive)
CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
The sensor is mounted above the front axle at the control arm.
- Remove nut -4- and detach linkage.
- Sensor -1- is mounted to the securing bracket -3- at vehicle.
- Remove sensor and securing bracket by removing both nuts -2-.
- Disconnect harness connector.
- By removing both socket head bolts (3mm) at level control system sensor, it can be removed from the securing bracket -3-.
Installing
Install in reverse order of removal.