Spray jets, removing and installing

Removing 

• Disconnect electrical connections for spray jet heaters.
• Remove plenum cover and wiper arms. Refer to Windshield wiper system, removing and installing  .
• Separate washer hose from plenum cover where applicable.

Fig 1: Pushing Jet And Lifting Jet From Cover

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Push jet -1- in direction of -arrow1-.
• Lift jet from cover -arrow2- and remove.
• Disconnect washer hoses from cable ties and pull off from jet.

Installing 

Install in reverse order of removal, noting the following:

• Set wiper blade park position. Refer to Wiper blade park position, setting  .