Ribbed belt pulley with free-wheel, removing and installing

Special tools, testers and auxiliary items needed 

Fig 1: 3400 Multi-Tooth Adapter

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Socket 3400

Fig 2: Torque Wrench V.A.G. 1332

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• VAG 1332 Torque wrench (or equivalent 40 - 200 Nm )

Fig 3: Locating Nut At Pulley

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Counter-hold securing nut using 3400.

• To remove, turn generator shaft clockwise
• To install, turn generator shaft counter-clockwise

• Clip protective cap onto free-wheel pulley.

Tightening torques