SID: Maximum distance, adaptation

This function stipulates a minimum distance for the SID.

Rapid data transfer HELP
Select function XX

Indicated on display:

Rapid data transfer Q
10 - Adaptation

Indicated on display:

Adaptation
Enter channel no. XX

Indicated on display:

Channel 43 Adaptation 30 →
max-value, oil in 1000 km < -1 3- >

Indicated on display: Display shows maximum distance until the next service (here, e.g. 30 = 30,000 km).

NOTE:

The value entered for the corresponding engine variation must correspond to value of table. Refer to General information .
Confirm maintenance intervals applicable to vehicle. Refer to Service Circulars, Maintenance.
The distance must be entered in steps of 1000 km. Accordingly, readout on the display will also be in steps of 1000 km.
When using the button pad on the scan tool, the number must be entered directly.
If an incorrect value is entered adaptation function will be terminated and must be restarted.

CAUTION:

Replacement instrument clusters calibrated in miles require input of distance reading in miles during adaptation (DO NOT convert to kilometers).
Replacement instrument clusters calibrated in kilometers require input of distance reading in kilometers during adaptation.

Channel 2 Adaptation 1
Enter adaptation value XXXXX

Indicated on display:

Enter required value via scan tool button pad, filling in initial spaces with "0".

Input value: e.g. 30000 km

Entry via keypad: 00030

Channel 43 Adaptation 30 Q
Enter adaptation value 00030

Indicated on display (example only):

Channel 43 Adaptation 30 Q
max-value, oil in 1000 km < -1 3- >

Indicated on display:

Channel 43 Adaptation 30 Q
Store changed value?

Indicated on display:

Channel 43 Adaptation 30 →
Changed value is stored

Indicated on display: