Adaptation (function 10): Adaptation
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -1- and -1- to select "Login procedure" function 11.
| Rapid data transfer Q 11 - Login procedure |
Indicated on display:
- Press -Q- button to confirm input
| Login procedure Enter code number XXXXX |
Indicated on display:
- Enter code number 13861.
| Login procedure Q Enter code number 13861 |
Indicated on display:
- Press -Q- button to confirm input
| Rapid data transfer HELP Select function XX |
Indicated on display:
- Press buttons -1- and -0- to select "Adaptation" function 10.
| Rapid data transfer Q 10 - Adaptation |
Indicated on display:
- Press -Q- button to confirm input
| Adaptation Enter channel number XX |
Indicated on display:
- Press buttons -0- and -9- to access "channel 09".
- Press -Q- button to confirm input
| Channel 9 Adaptation 0 → <-1 3-> |
Indicated on display:
NOTE:
The number can only be entered directly via VAG 1551 scan tool button pad.
- Press → button to advance the program sequence.
| Channel 9 Adaptation 0 Q Enter adaptation value XXXXX |
Indicated on display:
CAUTION:
- Replacement instrument clusters calibrated in miles require input of odometer reading in miles during adaptation (DO NOT convert to kilometers).
- Replacement instrument clusters calibrated in kilometers require input of odometer reading in kilometers during adaptation.
- If an incorrect odometer display value is entered and confirmed during adaptation, it cannot be changed. In this case the instrument cluster must be replaced.
- Enter adaptation value (odometer reading) via button pad.
Example: 89627
0 8 9 6 3
| 0 | 8 | 9 | 6 | 3 | |
| X | Hundred thousands: 100000 - 655350 | ||||
| X | Ten thousands: 10000 - 90000 | ||||
| X | Thousands: 1000 - 9000 | ||||
| X | Hundreds: 100 - 900 | ||||
| X | Tens: 10 - 90 | ||||
| Units: round up to the nearest 10 |
| Channel 9 Adaptation 0 Q Enter adaptation value 08963 |
Indicated on display (example only):
- Press -Q- button to confirm input
| Channel 9 Adaptation 8963 Q <-1 3-> |
Indicated on display:
- Press -Q- button to confirm input
| Channel 9 Adaptation 8963 Q Store changed value? |
Indicated on display:
- Press -Q- button to confirm input
| Channel 9 Adaptation 8963 → Changed value is stored |
Indicated on display:
- Press → to terminate adaptation of odometer.