Display group overview

DISPLAY GROUP OVERVIEW 001-011

Display group number	Indicated on display
001	1 = Road speed MPH 2 = Engine speed RPM 3 = Oil pressure switch 2 min 4 = Time h
002	1 = Odometer miles 2 = Fuel gauge 1 3 = Tank sensor Ohm 4 = Outside air temperature
003	1 = Engine coolant temperature °C
010	1 = Channel 30 2 = Adaptation tank sensor 3 = Channel 9 4 = Odometer miles
011	1 = Channel 4 2 = Language version 3 = Channel 3 4 = Consumption display (fuel gauge)

DISPLAY GROUP OVERVIEW 012-015

Display group number	Indicated on display
012	1 = Channel 40 2 = Miles since service 3 = Channel 41 4 = Time since service
013	1 = Channel 42 2 = Minimum value miles 3 = Channel 43 4 = Maximum value miles
014	1 = Channel 44 2 = Max. time interval 3 = Unassigned 4 = Unassigned
015	1 = Channel 45 2 = Oil quality 3 = Channel 46 4 = Total consumption quantity

DISPLAY GROUP OVERVIEW 050-140

Display group number	Indicated on display
050	1 = Odometer miles 2 = Engine speed RPM 3 = Oil temperature °C 4 = Engine coolant temperature ° C
125	1 = Engine 2 = Transmission 3 = ABS 4 = ADR (Autom. Distance Regulation)
126	1 = A/C
130	1 = Tire pressure 2 = Auxiliary heater 3 = Unassigned 4 = Parking assistance
140	1 = Radio 2 = Telephone 3 = Navigation 4 = Telematic (Tele-data-processing)

NOTE:

For an instrument cluster replacement, data from display groups 10 - 15 must be printed out.
Measuring value blocks 125 and 126 indicate the participants in the power train data-BUS.
Measuring value block 130 indicates the participants in the comfort system databus.
Measuring value block 140 indicates the participants in the information data-BUS.
Display will always indicate the actual values obtained from the sensors. The values which appear on the instrument cluster are modified and may be different.
If the actual engine coolant temperature is between 80° C and 100° C, instrument cluster will always show 90° C.