Adaptation for information data-BUS: Notes

NOTE:

The adaptation values of the table are input. See ADAPATATION VALUE .
Observe notes when replacing instrument cluster. See INPUT VALUES FOR REPLACING INSTRUMENT CLUSTER .

Indicated on display

Fig 1: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (1 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (2 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (3 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 4: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (4 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 5: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (5 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Input desired value via scan tool keypad using table. See ADAPATATION VALUE . Fill initial positions with "0."

e.g. desired input value: 5 Navigation system III (NS-Low) with radio (symphony)

Keypad input: 00005

Indicated on display (example only):

Fig 6: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (6 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 7: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (7 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 8: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (8 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 9: V.A.G 1551 Scan Tool Display - Adaptation For Information Data-BUS (9 Of 9)

Courtesy of AUDI OF AMERICA, INC.