Adaptation for comfort system databus: Notes

NOTE:

The adaptation values of the table are input. See ADAPTATION VALUE .
Observe notes when replacing instrument cluster. See INPUT VALUES FOR REPLACING INSTRUMENT CLUSTER .

Indicated on display:

Fig 1: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (1 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 2: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (2 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display:

Fig 3: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (3 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 4: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (4 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 5: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (5 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Input desired value via scan tool keypad using table. See ADAPTATION VALUE . Fill initial positions with "0."

e.g. desired input value: 768 with tire pressure control

Keypad input: 00768

Indicated on display (example only):

Fig 6: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (6 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 7: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (7 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 8: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (8 Of 9)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display (example only):

Fig 9: V.A.G 1551 Scan Tool Display - Adaptation For Comfort System Databus (9 Of 9)

Courtesy of AUDI OF AMERICA, INC.