On Board Diagnostic (OBD) functions

The following functions are possible:

1. 01- Check control module version. See CHECK CONTROL MODULE VERSIONS (FUNCTION 01)  .
2. 02 - Check DTC Memory. See CHECK DTC MEMORY (FUNCTION 02)  .
3. 05 - Erase DTC Memory. See ERASE DTC MEMORY (FUNCTION 05)  .
4. 06 - End Output. See END OUTPUT (FUNCTION 06)  .
5. 08 - Read Measuring Value Block. See READ MEASURING VALUE BLOCK (FUNCTION 08)  .
6. 10 - Adaptation. See ADAPTATION (FUNCTION 10)  .
7. 11 - Login procedure. See LOGIN PROCEDURE  .