LEMON Manuals
: Even more car manuals for everyone
Home
>>
Audi
>>
2003
>>
RS 6
>>
Repair and Diagnosis
>>
Engine Performance
>>
Testing & Diagnosis
>>
Exhaust System, Emission Controls - 4.2L V8 5V BITURBO - BCY
>>
Exhaust System, Emission Controls
>>
Exhaust system components, removing and installing
>>
Installation position of front clamps
Installation position of front clamps
Install clamps in position shown.
Angle alpha = 15°
Angle beta = 15°
Bolted connections face outward
Fig 1: Installing Position Of Front Clamps
Courtesy of AUDI OF AMERICA, INC.