LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> RS 6 >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Exhaust System, Emission Controls - 4.2L V8 5V BITURBO - BCY >> Exhaust System, Emission Controls >> Exhaust system components, removing and installing >> Components of mounting for front exhaust pipe

Components of mounting for front exhaust pipe

The following list pertains to Fig 1.

  1. Bolt - 25 Nm
  2. Washer
  3. Spring
  4. Spacer sleeve
  5. Spacer sleeve
  6. Lug
  7. Buffer
  8. Washer
  9. Bolt - 25 Nm
NOTE:
  • Collar of spacer sleeve -item 4- must face toward front exhaust pipe.
  • Collar of spacer sleeve -item 5- must face toward transmission support.
    • Fig 1: Identifying Components Of Mounting For Front Exhaust Pipe
    G02723538Courtesy of AUDI OF AMERICA, INC.
scientia non olet · About LEMON Manuals