Tire circumference, adapting

Indicated on display

Fig 1: VAG1551 Scan Tool Display - Tire Circumference, Adapting - Navigation System IV, From 2002 (1 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Press buttons -0- and -1- to select adaptation channel 01.
NOTE: A false entry can be corrected by pressing button -C-.
Press -Q- button to confirm input.

Indicated on display (example only):

Fig 2: VAG1551 Scan Tool Display - Tire Circumference, Adapting - Navigation System IV, From 2002 (2 Of 7)

Courtesy of AUDI OF AMERICA, INC.

The selected channel and the currently stored tire circumference in mm will be displayed in the line listed above.

Indicated on display (example only):

Fig 3: VAG1551 Scan Tool Display - Tire Circumference, Adapting - Navigation System IV, From 2002 (3 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Enter new tire circumference, fill initial space with a zero to input the four digit value (e.g. 01910) Tire table. See TIRE TABLE FOR AUDI A6: .
Press -Q- button to confirm input.

Indicated on display

Fig 4: VAG1551 Scan Tool Display - Tire Circumference, Adapting - Navigation System IV, From 2002 (4 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 5: VAG1551 Scan Tool Display - Tire Circumference, Adapting - Navigation System IV, From 2002 (5 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 6: VAG1551 Scan Tool Display - Tire Circumference, Adapting - Navigation System IV, From 2002 (6 Of 7)

Courtesy of AUDI OF AMERICA, INC.

Indicated on display

Fig 7: VAG1551 Scan Tool Display - Tire Circumference, Adapting - Navigation System IV, From 2002 (7 Of 7)

Courtesy of AUDI OF AMERICA, INC.