Instrument cluster, removing and installing: Removing
NOTE:
It is not necessary to remove the steering wheel to remove the instrument cluster.
If replacing a malfunctioning instrument cluster with a new one, note odometer reading on existing cluster prior to removal.
- Determine input values for replacing instrument cluster (i.e.: SRI values etc. where applicable):
- Adjust steering wheel completely out and downward.
- Press cover -1- upward at side and then remove cover from instrument panel.
- Remove Phillips head screws -1-.
- Pull out instrument cluster toward front.
- Cut cable ties at rear of instrument cluster.
- Unclip securing latches of connectors and disconnect connectors.