End output (scan tool function 06)

WARNING: This page is about a different car, the 1999 Audi A8, 1998 Audi A8, and 1997 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Indicated on display.

Fig 1: Scan Tool Display - End Output (1 Of 3)

Courtesy of AUDI OF AMERICA, INC.

Press 0 and 6 buttons. Function 06 initiates "End output."
Indicated on display.

Fig 2: Scan Tool Display - End Output (2 Of 3)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display.

Fig 3: Scan Tool Display - End Output (3 Of 3)
Courtesy of AUDI OF AMERICA, INC.
Switch ignition off.
Disconnect VAG 1551 Scan Tool (ST) from Data Link Connector (DLC).