End output (scan tool function 06)

WARNING: This page is about a different car, the 1999 Audi A8, 1998 Audi A8, and 1997 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Press buttons 0 and 6. With 06 the function "End output" is selected.
Indicated on display:

Fig 1: Scan Tool Display - End Output - Scan Tool Function 06 (1 Of 2)
Courtesy of AUDI OF AMERICA, INC.
Press Q button to confirm input.
Indicated on display:

Fig 2: Scan Tool Display - End Output - Scan Tool Function 06 (2 Of 2)
Courtesy of AUDI OF AMERICA, INC.
Switch ignition off
Disconnect VAG 1551 Scan Tool (ST) and disconnect Data Link Connector (DLC).