LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Fuel Supply - 3.7L & 4.2L V8 4V (AEW, ABZ)) >> Fuel pump with integrated reservoir, removing and installing >> Installing

Fuel pump with integrated reservoir, removing and installing: Installing

WARNING: This page is about a different car, the 1999 Audi A8, 1998 Audi A8, and 1997 Audi A8. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal.

Tank retaining strap tightening torque: 20 Nm (15 ft lb)

NOTE: Notes on installation:
  • When installing the fuel tank, make sure that the wires for the ABS wheel speed sensors are correctly routed.
  • First slide the ventilation lines through the opening on the side chassis member and then guide in the fuel tank.
scientia non olet · About LEMON Manuals