Oil seal for right Camshaft position (CMP) sensor, removing and installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Clean running and sealing surfaces.
Do not oil sealing lip before installing.
Install sleeve from tool 3241 on camshaft.
Install seal with sleeve 3241/1 and bolt 2085/1 until flush.

Fig 1: Installing Seal With Sleeve 3241/1 And Bolt 2085/1
Courtesy of AUDI OF AMERICA, INC.
Install Camshaft Position (CMP) sensor.
Connect connector for CMP sensor.