LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2003 >> A8 Quattro >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (On Board Diagnostic (OBD) - Generic Scan Tool - 4.2L V8 5V - Art, Awn, BBD) >> ST-Generic Sean Tool >> On Board Diagnostic (OBD) >> On Board Diagnostic (OBD), technical data >> Engine Control Module (ECM) equipment

Engine Control Module (ECM) equipment

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2004 Audi A6, 2003 Audi S6, 2003 Audi A6, 2002 Audi S6, and 2002 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE IDENTIFICATION

Engine identification ART, AWN, BBD
System identification Bosch Motronic
On Board Diagnostic (OBD) OBD II
DTC memory Permanent memory(1)
Memory for adaptation values Temporary memory(2)
E-Gas Yes
Knock sensor control 2 sensors
Charge air regulation No
Oxygen sensor control 4 sensors
Camshaft adjustment Yes
Intake manifold change-over Yes
Secondary air system Yes
(1) Independent of voltage supply.
(2) The values are erased when voltage is interrupted.